90th Birthday Card for a Friend

AW Jean 90

 

I had to make this card in a big rush for a friend when I realised that I needed it by the next day to deliver for her 90th birthday! Eeek. It can take me hours to make a special card.

Searching through my UFO pile (‘unfinished objects’) I discovered that I had a background card base and panel already stamped. These had been sitting in my stash for over a year waiting to be finished into a project. Now was the time to complete it.

It’s ‘Send a Card to a Friend’ over on the Simon Says Stamp Blog this week – so I entered this one.

How it was done:

The card blank had been stamped directly using Distress Inks.

A little Distress Ink was blended around the edges of the card blank and patterned paper.

The birds had been stamped and heat embossed in gold powder. I coloured them with glitter and gel pens, mounted the paper onto green card and glued to the card front with foam pads for dimension.

The die cuts had also been sitting in my stash. I shaped them lightly with a ball tool and glued to the card front.

I finished the card with peel off stickers (great when you are in a super hurry) and added glitter glue for extra sparkle. Et voila card done. Phew!

Materials:

Floral Notes and A Little Bird Told Me stamp sets (Chocolate Baroque)

8 X 8 inch card blank, 6 X 6 decorative paper (Crafty Individuals Shades of Summer) and green card for mounting

Inkpads: Versamark, Distress Inks (Victorian Velvet, Tea Dye)

Glitter and gel pens (Sakura and Pentel)

WOW Embossing Powder (Gold Rich)

Glitter glue (Stickles Diamond and gold)

Die cut foliage (Sizzix Tim Holtz), electronic cut fern (Tattered Lace ScanNCut), punched flowers (Tonic Petal Pairs)

Peel off stickers (gold)

Advertisements

Sea World Tag Card created with stamps from Chocolate Baroque

Good afternoon. This mini tag card was created with Gothic Fragments (background), Mermaid Queen and Underwater stamps from Chocolate Baroque.

The Simon Says Stamp Challenge (Monday) this week is tags – so I have entered it into the challenge too.

AW Mini tag card

Materials:

How it was done:

  1. The background panel was an inked paper from my stash overstamped with the Gothic Fragments stamp. A tag die was used to cut the paper plus a background panel from scrap card (to support the paper), glued together and edged with black marker to frame.
  2. Texture paste was applied through the stencil with a palette knife to add a little texture – coloured over the top with sparkle pen when dry (the Pebeo Cement dries very quickly). The shell and weeds were stamped with Versamark and embossed with gold powder. Ribbon and the netting were attached before gluing to the card front.
  3. The seahorse and weed was stamped with Versafine and embossed with clear powder. The image was then cut out and coloured with watercolour and sparkle pens.
  4. The embellishments were glued down using 3D glue gel. A little glitter glue was added to finish.

Nautical Seahorse card created with stamps from Chocolate Baroque

Good morning. I created this nautical tag card using Underwater, Ammonite and Seaside Dreams (sentiment) stamps from Chocolate Baroque.

The Simon Says Stamp Challenge (Monday) this week is tags – so I have entered it into the challenge too.

AW Nautical Seahorse

Materials:

  • Underwater, Ammonite and Seaside Dreams stamp sets
  • A5 Kraft card blank, card scraps in blue, white and Kraft card
  • Versamark
  • WOW Embossing Powders (Clear Gloss and Detail White)
  • Sparkle brush pens (clear and blue)
  • Fine tipped pen (opaque white)
  • Bakers twine (red & white)
  • Starfish and seahorse embellishments – made from paper clay and moulds from my stash
  • Die to cut tags (Tattered Lace)

How it was done:

  1. The card background was stamped with Versamark and heat embossed with clear powder. Clear sparkle pen was brushed over the shells and ammonite.
  2. A strip of white card was overlaid with small strips of blue and glued to the background to give the striped panel.
  3. The starfish was stamped with Versamark, embossed with white powder and cut out.
  4. The tags were cut from blue and Kraft card. The images and text were stamped with Versamark and heat embossed with white powder. The seahorse was coloured with blue sparkle pen. Faux stitching and edging were made with the fine tipped white pen.
  5. The tags were tied with the bakers twine and embellishments glued to the card front. Foam pads were used to add dimension.

Quick and Easy Birthday Cards for the Little Ones

AW Birdy 1

AW Birdy 2

 

Good afternoon. These were another quick and easy make. I had to rush make these for a couple of little friends ready for their birthday party yesterday and got them finished half an hour before leaving – just enough time for the glue to dry – tee hee.

Materials:

5 X 5 inch white card blanks, white card for layering, patterned papers and plain coloured card to match (black, blue, pink, orange, green and glitter pink), waste mount board

Ready made decorative chipboard numbers

Alcohol ink pens (pink and blue)

Glitter glue (silver)

Happy Birthday dies (Tattered Lace), Lettering dies (Create & Craft Couture set), Birdy dies (Sizzix BigZ Bird #3)

How it was done:

The background mats were trimmed slightly smaller than the card blank and edged with alcohol marker to frame.

The bird body was cut from mount board and floral paper. The large circles from white card and smaller circle from black, to make the eyes. The beak and legs were cut from orange and pink card, and wings from coordinating plain card.

Lettering was cut from plain card. You can see what a rush I was in as they aren’t exactly glued down straight! I decided to add a bit of glitter glue to the foreground which helped to ‘ground’ the birdy but also helped to disguise the slightly off lettering and odd glue splodges.

I hate having to come up with a design in a super rush but it was well worth it. So much nicer and more special than a shop bought card.

Airship Pirate Steampunk card created for Chocolate Baroque

AW Airship Pirate

 

Good morning. Today I am sharing one of my recent samples created for the Steampunk shows recently on Hochanda. I used a few of my dies to create this nautical themed card. I hope that you like it.

Materials:

  • Steampunkery and Punky Expressions stamp sets
  • 8 X 8 inch white card blank; white, blue and brown kraft card; recycled acetate from packaging
  • Versamark and Distress Ink (Vintage Photo)
  • WOW embossing powders (white plus mix of Copper and Gold Rich)
  • Koh-I-Noor Charcoals (White)
  • Sakura Glitter and Glaze Pens (red)
  • Dies to cut a circle frame (approx. 16cm diameter – TODO), steampunk cogs (Tattered Lace, Trimcraft) and nautical themed embellishments (Couture Creations)

How it was made:

  1. I trimmed the blue card to fit the card front and leave a small white border. The sentiment and airship were stamped with Versamark and heat embossed with the white powder.
  2. The circle porthole frame was cut from Kraft card. A piece of acetate was cut to fit behind.
  3. The cogs and wheel were cut from Kraft card and coloured with gold embossing powder or red glaze pen. The gulls were cut from white card.
  4. The scene was built up and coloured using the white charcoals. A little red glitter pen was added to the boat and a small die cut gull stuck down. The frame was glued over the top using 3D shaker foam. Note: you could add some sprinkles or glitter for added fun.
  5. The scroll was created from a rectangle, rolling the ends around a paint brush to curl. A little Distress Ink was added to the edges to age. The die cut embellishments were used to decorate.

The End–Halloween Mixed Media Canvas created with Powertex

I just love a bit of Halloween Fantasy. Have you seen the FAB new stencil – ‘The End’ – from Powertex? Perfect for Spooky makes.

AW Halloween 1

I used Easy Coat decoupage medium to apply stamped images from the Chocolate Baroque ‘Texture Fragments’ to the background. I also used Easy Structure Paste applied through the stencils and some onto the background and impressed with the stamps for added texture.

AW Halloween 2

AW Halloween 3

AW Halloween 4

No fabric was included in this one but I used a lot of paper cut shapes treated with Transparent Powertex; great for stiffening, gluing and sealing the embellishments.

AW Halloween 6

I hope that you enjoy my spooky scene.

AW Halloween 5

Materials Used:

  • 30 X 22.5cm stretched canvas
  • 30 X 30 cm Stencil (The End)
  • Powertex Hardener (Transparent and Ivory)
  • Easy Coat Mat Medium
  • Easy Structure Paste
  • Bister (Green and Yellow)
  • Chocolate Baroque Stamps (Texture Fragments)
  • Brusho Powders (Lemon and Leaf Green)
  • Alcohol Markers
  • StazOn Inkpad (Jet Black)
  • Gilding wax (gold)
  • Tissue paper, card (white and black)
  • Electronic cutting files were used to cut the bats (Silhouette), spiders (JM Rush Silhouette Store) and ferns (Tattered Lace Brother ScanNCut USB). The skeletons and vines (Sheena Douglass), and Pumpkin (Sizzix) were cut using dies.

Autumnal Heart Hanger created for Chocolate Baroque

Good morning. This was another of my recent show samples featuring the Autumn Hedgerow and Nature Table stamps from Chocolate Baroque.

 

AW Autumn Heart Hanger

Materials:

How it was made:

  1. The patterned paper was glued to the heart front, a sandpaper block was used to neaten the edges.
  2. The tree was stamped with Versamark and heat embossed with Olive powder.
  3. The sentiment was stamped using the moss green watercolour pen. Note: I used only parts of the larger sentiment stamp, colouring just those areas with the pen.
  4. The leaves were stamped around the edge using green and brown watercolour pen.
  5. A little blue mica spray was added to the right hand side. The left hand side was covered with Versamark and embossed with clear powder.
  6. The leaves and autumnal embellishments were stamped onto pale orange card. A little more colour was added with watercolour pens. The images were cut out and shaping was added with a ball tool. Glossy accents added to the fruits. The Autumnal embellishments were attached with 3D glue gel.
  7. Lose glitter and glitter glue were added for extra sparkle.
  8. The quilling flower was cut from pale orange card and rolled up the create the flower. It was embellished with ready made stamens and a bit of glitter glue.
  9. The background decorative heart was cut from copper pearl card and glued to the back. The hanging ribbon was glued between the front and back layers.