Recycled Bottle and Glass Mixed Media with Powertex

I simply love to recycle, upcycle and repurpose so this project using a recycled wine bottle and a set of cheap cocktail glasses from the charity shop was a perfect project for me. I also used some of my old T shirts and fabric scraps too.

AW Festival 1

This set is now perfect for any festive or celebratory occasion. The bottle could be used either as a decanter (by using with a bottle stopper or cork) or used with a slim candle to adorn the table. Using Powertex enables items to be easily washed too.

Materials used:

How it was done:

The bottle was actually a project that I started on my level 1 Powertex Tutor training. I was fairly happy with it but I had always wanted to take it a few steps further. I am definitely a ‘more is more’ type of girl and I wanted to add extra embellishments to complete it – but what? Sadly it got confined to the corner for over a year before the idea finally came to me when I came home from the charity shop with my set of cocktail glasses.

AW Glasses 1

The lemon coloured glasses inspired citrus, the blue coloured glasses inspired berries – yay – off we go!

AW Bottle 1

Starting with my bottle: Blue Powertex medium was used to coat recycled T shirt fabrics and hessian which was draped around the bottle to give texture. Kitchen paper was separated into single ply and blue Powertex was used to glue it around the neck of the bottle to give added texture. Blue Powertex was also used to paint and glue the plaster face.

Eeeek – I was freaking out a bit this stage as it looked awful. I will say that this was part of the training. We were given a few challenges! The blue is a gorgeous colour but not necessarily the easiest for your first ventures. If you are a beginner I would recommend starting with Bronze Powertex and colouring as I did for the blue glasses as given below; achieving a similar final result with less palpitations – tee hee.

AW Bottle 2

Spritzing with Brown and Red Bister gave a nice purple muted effect which was lovely, and also blended in the darker T shirt material nicely. Powercolor and Colortricx Pigments were mixed with Easy Varnish and dry brushed over the piece to highlight textures. The dry brushing really does make so much difference! Ooooh much happier now, but as I said – it needed more work in my mind.

AW Fruit 1

Now for the embellishments: With fruit embellishments in mind I mixed up some Stone Art with Ivory Powertex to make a clay and used silicone moulds to make citrus slices, nuts, leaves and berries. Once dry I used Secret Art Loft Acrylics to paint them.

AW Fruit 2

When painting the fruit slices the outer ring of pith was left unpainted. Dry brushing with Ivory Powertex was used to highlight the central pith texture and make the lemon slices look more realistic.

AW Fruit 3

The same with the orange slices.

AW Fruit 4

The berries and nuts were also painted with Secret Art Loft Acrylics. I mixed colours to give a more naturalistic look.

AW Fruit 5

Varying colour mixes and depth.

AW Fruit 6

Purples, pinks, oranges and green mixes were used to colour the berries. Once coated with varnish (last steps) they looked quite realistic.

AW Bottle 3

Various fruits, nuts and leaves were used to embellish the bottle. Items were stuck down using Transparent Powertex. Where needed 3D sand was mixed with Bronze Powertex in order to make a 3D glue to stick down shaped embellishments on the textural surface.

Yay – fulfilling my ‘more is more’ – ha ha.

AW Bottle 4

Secret Art Loft pigments were mixed with varnish and were dry brushed over textured areas and over the berries to give extra pearlescent sheen.

Coloured Powertex is weatherproof and therefore washable. Acrylic paint layers were further protected by painting with Easy varnish to ensure that the bottle was fully washable. The varnish also enhanced the painting and gave the fruits and berries a lovely sheen. Happy bunny.

AW Glasses 2

Next to decorate the glasses: I collected together varied textural fabrics. The blue background is my plastic shower curtain that I use to cover my bench – joyous messiness evident!

AW Glasses 3

The glass stems and base of the bowls were painted with a coat of bronze Powertex. Any drips were removed with a damp cloth. T shirt fabric was cut into strips and stretched to make a ‘cord’ for wrapping the stems. More fabrics and T shirt strips were coated with Bronze Powertex and wrapped around the glass bowls. The T shirt cord held everything in place around the top of the glasses while drying. I applied the main 3D texture just to one face, leaving the backs flatter (otherwise they might get in the way when drinking from the glasses). The smoother stems made them easy and comfortable to hold.

AW Glasses 4

The blue glasses were embellished with berries and textures enhanced with dry brushing using the blue/purple toned Secret Art Loft Pigments.

AW Glasses 5

Oooh yummy.

AW Glasses 6

The yellow glasses were embellished with citrus slices and textures enhanced with dry brushing using the citrus and gold toned Secret Art Loft Pigments.

AW Glasses 7

More yummy.

AW Festival 2

I hope that you like my celebratory table set. I really enjoy making these – and using now them – special glasses seem to make the contents more special too.

AW Festival 3

Happy crafting, Anne x.

Fantasy Pine Scene Canvas created with Powertex

I had so much fun creating this pine cone scene.

AW Pine Scene Canvas

 

I used some twigs and pine cones from my stash (they must be fully dried out to avoid development of mould), hessian, T shirt fabric, kitchen paper, Sand & Balls and even broken egg shells (fully washed and membranes removed).

 

AW pine cone jewellery 2

 

The background sky was created with Pebeo Fantasy paints (Moon, Prisme and Vitrail).

 

AW Pine Scene Canvas cropped

 

Materials:

Daisy Bowl created with Powertex

This was my first attempt at creating a 3D bowl with Powertex. I was really chuffed with the results.

AW Daisy Bowl 2

AW Daisy Bowl 3

AW Daisy Bowl 4

AW Daisy Bowl 1

I recycled an old cotton scarf and used the lovely Daisy Moulds to create 3D embellishments from Stone Art clay.

 

AW Daisy Bowl 5

AW Daisy Bowl 6

AW Daisy Bowl 7

AW Daisy Bowl 8

I also added some 3D Sand & Balls plus a few glass seed beads for more texture.

AW Daisy Bowl 9

AW Daisy Bowl 10

Materials:

Fantasy Sea Shore Canvas created with Powertex

I simply love Powertex for creating mixed media. It enables you to sculpt fabric and to create 3D embellishments – the possibilities are endless.

AW Powertex Sea 1

I simply adore the sea but unfortunately I couldn’t live further away from the seaside. I had so much fun creating this one and disappeared into a fantasy world of sea, sand, fossils and shells. So much scope for texture.

AW Powertex Sea Close 1

I recycled an old cotton scarf and a bit of old potato sack, created extra texture using sand and balls, and even created the fossils using moulds with Powertex clay.

AW Powertex Sea Close 2

I hope that you like my fantasy sea shore.

AW Powertex Sea Close 3

Materials:

Egyptian Cards and a bit of experimentation with Powertex and stamps

Oh I just love the new stamps from Anna Hewlett (Rosehart Studio) and Powertex. They sold out in a flash on the Hochanda shows too. Here are a couple of my card samples created for the show.

 

AW Heiro Card

 

On this one I used the Hiero Heaven stamp. The background was stamped and embossed with clear or gold embossing powders onto the black card. The vintage papers were created by stamping and colouring with Distress Inks (Scattered Straw, Vintage Photo and Peeled Paint).

 

AW Scarab Card

 

 

On this one I created the background by stamping with black archival ink onto craft card and colouring with pencils (they gave a nice chalky effect).

I created the gold embellishments using a Soft Form Relief Paste (Pebeo). I inked the Hiero Heaven and Scarabella stamps with archival black ink, spread with the paste and left to dry for 48 hours before peeling away. Extra colour was added to my scarab using acrylic paint.

No Powertex in these but I did have a little play:

Experiments:

This soft form paste stays flexible when dry so it can be curved around 3D objects and can also be stitched into. Some of you may know me for my paper crafting and textile art, so this is something I keep in my stash.

I have since had an experiment with using Powertex onto my stamp and leaving that to dry. I did have a concern about using Powertex on my stamps at first. Not that it would harm the rubber but I like to mount my stamps onto foam mount for clean crisp stamping in my textile and paper crafting. I thought that the Powertex might seep into the foam and harden it up ruining the cushion. I did a couple of bench tests to try it out:

 

AW Powertex experiment 1

  • I inked up part of the Heiro Heaven panel with Archival Ink and poured on some Ivory Powertex. Immediately it started reacting strangely with the ink. The outer edges of the puddle started moving and swirling and lost their colour.
  • I also poured some Powertex onto a non-inked area (although there was a bit of residual dried ink on there).
  • I mixed in a little Stone Art into the Powertex, making a paste, and spread this onto an inked area. This was more controllable than pouring liquid and there was no strange reaction evident with the ink beneath.
  • I also poured some Powertex over one of the smaller stamps, deliberately spilling it over the sides and onto my foam mount.

Experiment results:

Similar to my usual texture paste it took 24-48 hours to dry fully. All the test pieces worked really well and peeled away from the stamp really easily. Residual dried on Powertex was easily removed with warm water and a nail brush. The embellishments are quite stiff but remained flexible enough to curve around if desired, particularly if warmed up in the hands or with a hair dryer.

 

AW Powertex experiment 2

The ink transferred really well giving a nice dark image into the embellishment crevices, even the one that seemed to have a strange reaction with the ink worked well.

The smaller stamp that I covered in Powertex also cleaned up easily and the Powertex pulled away from the mount foam ok too, although I had to pull it away gently as it hung onto the foam quite tightly.

If you use unmounted stamps then obviously there is no issue in covering them with Powertex. I would say that if like me, you like to foam mount your stamps, then I would recommend making a bit of a paste with Powertex plus Stone Art or 3D Sand and spread this over. It is much more controllable and you can keep it away from the edges and foam mount more easily.

I hope that my experiments help with your own creative play.