Dream, Wish, Create a Beautiful World

This lovely image of a young girl (Victorian Photographs Rice Paper) really called to me and inspired me to make this piece. To me she portrayed a young girl that had experienced in her life far more than any child should. Alone she would dream and wish for a better world. Her creativity would enable her to escape from the trauma and open the door to a world full of beauty.

I know that many can testify that using imagination and creativity really does take them to a happy place and can increase wellbeing. Sorry, maybe a bit heavy? I hope that you like the ‘beautiful world’ that I have created.

I first collected together lots of elements from my stash; a small wooden pallet (15cm square from Art-C), a thick greyboard panel with frame (13.5cm X 5cm, 6cm X 2cm centre, from Tando Creative) plus smaller panel, silicone moulds to create flowers and fern, MDF Heart Keyplate, Penny Washer and Heart Flower (Powertex), scraps cotton fabric and lace.

I created the flowers and ferns using silicone moulds and Stone Art Clay. Stone Art was mixed approx. 50:50 with Ivory Powertex plus a little Transparent Powertex. Ivory Poweretex was also used to coat the inner greyboard pieces.

The wooden pallet and remaining greyboard and MDF pieces were coated with a leftovers mix of Powertex (mainly Lead and Ivory). I keep any leftover Powertex in recycled little takeaway sauce pots (plastic with fully airtight lids). My mix gave a lovely warm grey colour.

I spread Easy Structure Paste across the centre of the pallet and then spritzed with Green Bister.

The rice paper images were applied to the Ivory Powertex coated panels using Easy Coat Mat Medium. Note: the sentiment is actually snipped from the ‘Creative Paper’ branding down the side of the paper. I also used some small leftover snips from a floral paper.

Cotton fabric was treated with Ivory Powertex and draped diagonally across the middle. More texture was added using 3D Sand & Balls.

The flowers, ferns, Heart Flower and Penny Washer were coloured with Acrylic Inks; Palm Leaf, Viola, Viola Metallic and Golden Metallic. A little gold colour was also applied to the edges of the keyplate and image panels, plus drizzled onto the texture paste. The fabric was spritzed with a little Green Bister.

A strip of thin fabric braid was treated with Powertex, coiled tightly into a spiral, and added to the MDF flower centre (coloured with gold ink when dry). A sheet of Angelina fibre was created by ironing heat fusible sparkly fibres between sheets of baking parchment. I collected together a few snips of lace plus some Powercotton.

Next I put it all together. I hung a small metal ‘wish’ charm from the base.

I used Easy Structure Paste through the Duo Arty Quotes Mini Stencil to add the ‘Dream’ sentiment.

More Acrylic Ink colour was dry brushed over textured areas.

I love the new Acrylic Inks. The fluid formula enables you to drizzle areas with intense colour too.

I was really pleased with my ‘Dream, Create, Wish’ mini artwork. I think that I might just have to keep this one for me.

Off to get busy as I have so many ideas. I will share more soon. Hugs all xxx.

Steampunk Jewellery Plier Stands using Powertex

I have been meaning to decorate my jewellery plier stands for ages and finally got them finished.

 

 

I had a bit of a problem with these in that they started off as a plain varnished wood surface. I initially coated them with white Gesso with a view to painting them with acrylics. However, the Gesso did not bind well to the varnish layer – eek! All ideas were halted. These need to be fairly robust and a tonne of flaky chips after a short use was not what I wanted!

I then discovered Powertex and yay, I would be able to rescue and decorate my plier stands after all. Coating the entire surface with rice papers and torn kitchen towels would create a tough protective skin over the surface and prevent the feared chipping off of the base layers.

 

HOW IT WAS DONE

I first collected together lots of embellishments; die cut cogs and pipework (Sizzix dies), MDF Keyplate (Powertex), metal clock hand and chains, old light bulbs and screws.

 

I tore out images from Creative Rice Paper (Powertex). This particular sheet seems to be out of stock but there is a similar Victorian Steampunk Paper available. I also separated layers of kitchen paper and tore them into pieces to coat the surface. This would add texture and a protective layer.

STAGE ONE

First I applied the torn decorative papers using Easy Coat Mat Medium. Ivory Powertex was then painted on to blend in the image edges.

STAGE TWO

Next layers of kitchen paper were bonded all over the surface. Some were glued down with Ivory and some with Terracotta Powertex. Die cut card embellishments were also coated with Powertex and glued down.

Texture was added by applying Easy Structure Paste through a texture stencil.

I also had a try at the rust technique. I mixed some Rusty Powder into Ivory Powertex along with a few drops of white wine vinegar. This was painted and dribbled over the surface (extra powder sprinkled on top) and spritzed with water and vinegar before leaving overnight to develop. I spritzed at intervals, several times. I avoided the areas that will be in contact with my pliers.

STAGE THREE

Next I brushed over and added colour using Acrylic Inks in Tangerine, Egg Yolk, Aqua and Metallic Gold.

STAGE FOUR

I also applied a little gold Pebeo Gilding Wax on some areas. When fully dry and cured (I left them for 3 weeks) I coated the surface with Easy Varnish to fully seal and protect.

I have included lots of images of how all the surfaces were built up.

Texture and die cut cogs have been added.

Rust and colour added.

Side finished with stronger thick greyboard embellishments. Any large embellishments protruding from edges need to be strong (thinner card would be prone to warp and bend).

I started with a larger clock image on the other side.

Die cuts and texture added plus a metal clock hand for dimension.

Finally finished with thicker embellishments and more dry brush work and gilding wax.

Love this character.

Texture and layers built up. Waiting for the rust to develop.

Building up the layers of transparent colour makes so much difference.

The second plier stand started off in the same way.

At this stage you might feel like giving up. What a mess!

Just keep going, adding layers of rust texture and colour.

Just loving the gorgeous layers of texture and colour.

I used several layers of the die cut pipework together to make them thicker and stronger on this side.

Wooohooo – this is soooooo yummy (or is it just me – tee hee).

Another end panel.

I used an MDF keyplate (Powertex) to embellish this end.

The final colouring makes such a difference.

The final side had a couple of little storage wells. I won’t really be using these so a perfect place to embellish with larger items.

I had fun adding recycled light bulbs, screws and bits of chain etc. I used structure paste and Powertex treated kitchen paper as a 3D glue to hold things in place.

Initially I had added a thinner die cut cog to the end but it wasn’t really strong enough. Here I added another thick greyboard cog over the first. Much more practical. I also added a small MDF Butterfly.

Here you can see more of the Steampunk treasures added. I also added some 3D Sand and Balls.

Love this Steampunk birdie peering out.

Well I hope that all these pictures have not overwhelmed you. I wanted to show how all the stages were built up. It also shows the stages that look awful, perhaps where a beginner might give up! Remember, if it all goes wrong just keep applying colour, inks or coloured varnishes. If this fails and you are really not happy – just paint over the whole thing with a base colour of Powertex and start again.

Hugs, Anne xxx.

Alice in Wonderland Clock created with Powertex

I have had so much fun joining the Alice in Wonderland Tea Party with Powertex UK. I love fantasy themes and wanted to make a working clock full of bright fun colours and sparkle. Hope that you like my Alice Clock. It certainly fills me with cheer and makes me smile.

The theme on this weeks Simon Says Stamp Challenge (Mon) is ‘inspired by a song’ – so I have entered this one. I feel that I am always running late so the White Rabbit Song ‘I’m Late’ fits me perfectly and is appropriately the main sentiment on my clock.

I have also entered it into this months Mixed Up Mag Texture Challenge.

I had an old heart shaped MDF working clock that really needed a revamp. I combined it with the Pocket Watch Kit to create my crazy clock. The kit contains a stand, solid back and frame to make up a 3D pocket watch. Also included are lots of smaller embellishments for decoration – great kit.

The stand was put together using Black Powertex to coat and glue everything together.

The open watch frame was coated with Black Powertex.

The back and outer rim of the solid pocket watch shape were also coated with Black Powertex. The central area was painted with Ivory Powertex ready for adding images. When dry, pocket watch images from a decorative Rice Paper were applied using Easy Coat Mat decoupage medium. The sheet I used does not appear to be in stock at the moment but the Victorian Steampunk sheet is similar. The surface was spritzed with a little Green Bister to knock back the harshness of the Ivory colour.

I coated my recycled MDF clock with Ivory Powertex on the front, Black on the back. Again Easy Coat was used to add Rice Paper images. You can still see the original painted numbers on my old clock face.

A layer of Crackle Accents (Ranger) was added onto the clock face images to give an aged crackle effect. When dry, more Green Bister was added to emphasise the crackle (the wet colour seeps into the cracks). Texture was then applied using Easy Structure Paste through the Wonderland Stencil. I dabbed over with a little black Powertex to cover some of the bright white colour. Easy Structure Paste was also used as a strong 3D glue to attach the watch to the stand.

Rice paper images were also applied to my recycled heart clock. Layers of kitchen paper were applied around the decoupaged images using ivory Powertex to give added texture. I also added Easy Structure Paste through the stencil to add hearts.

Several of the new Acrylic Inks and Paints were used to add colour to my project (Acrylic Inks in Egg Yolk, Tangerine, Golden Metallic, Viola Metallic and Aqua Metallic; Acrylic Paints in Raspberry Sorbet, Orange Marmalade and Key Lime). The inks are gorgeous fluid transparent colours ideal for painting over other colours or patterned papers. The medium bodied acrylic colours are semi-translucent and are great for heavier colour and layering. I LOVE them.

A piece of tree bark was treated with Transparent Powertex. I have had this piece in my stash for years (so it was fully dried out) just waiting for a suitable project to use it on.

The pocket watch frame was glued in place with Transparent Powertex ensuring that it was well centred. Easy Structure paste was used to glue 3D elements onto the base stand. Bronze Powertex was used to cover and colour the Easy Structure Paste where needed. At this stage I checked that the clock hands would be able to move freely around the clock face (once it’s all glued and dry it’s well and truly glued!).

The small MDF heart (from my recycled clock) was treated with black Powertex. I added some 3D Sand and Balls into the wet Powertex for texture. When dry I coloured with Easy Varnish and Interference Lilac Pearl Pigment. Have you seen these new Pearl Pigment colours? WOWeeee! I rubbed over a little Pebeo Gilding Wax (gold) to cover the edges and highlight the texture more.

Gilding Wax was also rubbed over the Pocket Watch tops and tree bark. A thick greyboard frame and rectangle was coated in Black Powertex to create a table. A piece of lace and scrap of knitted cotton was also coated in Black Powertex to fill in the base of the ‘tree’ and to create the table cloth. I started placing other MDF elements from the Pocket Watch Kit (but not glued down yet).

More colour was added with the Acrylic Paints. The metal clock hands were coated with Jade Patina (Ranger).

….. and yes my craft stash is encroaching inwards – tee hee.

I continued to build the scene, coating elements with Black or Ivory Powertex then colouring with Acrylic Paints before gluing down with Powertex.

The MDF sentiments and Flamingoes were from the Alice Collection; the butterflies, dragonfly, numbers and spirals from the Pocket Watch Kit. The sentiment plaque was a greyboard piece from my stash. I added some 3D Sand and Balls to the Flamingo wings for extra texture.

A layer of Glossy Accents (Ranger) was applied over some of the painted elements and fine crystal glitter dropped into the wet surface for added bling and sparkle. The piece was then left overnight, propping it in a horizontal position.

I also added an MDF Heart Flower, Lion, cat and small bird from Mini Hieroglyphs, MDF flowers and leaves plus greyboard flowers (from my stash). The little signposts were made from recycled wooden canvas stretchers and black alcohol marker used to write.

Then I had fun with my dies. Each element was built up using 4 layers of either black or Kraft card and layers glued together with Powertex to make them thick and robust. Coffee Archival Ink (Ranger) was used to stamp the chairs (Sizzix). The cake stand, cupcakes, small cup & saucer, spoon & fork and teapot cut (Intricutz); the larger cup & saucer and top hat (Sheena Douglass); the chandelier (Crafters Companion) were built and glued in place with Easy Structure paste where needed to give added depth. More Glossy Accents and glitter were added over some of the elements.

Finally a little dry brushed colour was added over some of the textured surfaces using Easy Varnish and the Pigment colours (Iridescent Lilac, Violet Valentine, Rich Gold).

I will leave it for around three weeks for everything to fully cure, then finish with Easy Varnish to fully seal everything and give added protection to painted surfaces.

I’ve popped in some close ups for you. Ooooh sparkly flamingos.

I am always running late so this sentiment is perfect for my clock – tee hee.

You can see that crackle texture on the watch faces here.

Lots of layering and sparkle.

I absolutely love my new clock. I hope that you love it too, Anne xxx.

Steampunk Travellers Mixed Media Canvas with Powertex

Oh my goodness – I really enjoyed myself with this Steampunk canvas – I just love to get myself lost a bit of fantasy. I used lots of Chocolate Baroque stamps from my stash (Punky Expressions, Words of Inspiration, Steampunkery, Steampunk Travel, Punky Flowers, Steampunk SeaWorld) and two of the new stamps from Mark Gould (Sailor Jim and The Aviator).

As the theme on the Simon Says Stamp Blog Challenge (Wed) this week is ‘Layer It Up’ – I have entered this one.

I first cut 2 pieces of left over mount board and trimmed them to approx. 25 X 31cm and 31 X 41 cm. The back board was coated front and back with Bronze Powertex. The second board was coated with Ivory Powertex.

I used a page from an old atlas and glued it to the board using Easy Coat Mat decoupage medium. Note: There are some lovely map themed Rice Papers on the Powertex website.

I then applied some Easy Structure paste through stencils from my stash to create some wave and cloud textures.

Next I applied elements from decorative rice papers (sea themed and pocket watches) using Easy Coat medium. It looks like the pocket watches sheet I used is out of stock but there is a similar Victorian Steampunk sheet available. Tip: draw around the parts of the image that you desire using a water brush or pen, then gently pull away the image from the sheet. This avoids harsh cut edges and the images will blend better into the background.

I also applied a little of the new Golden Metallic Acrylic Ink through my stencils, and onto areas of the pocket watches.

I next stamped my images using Versafine Ink (Onyx Black) onto recycled tissue paper (packaging). I also stamped some onto white card using Versafine (Vintage Sepia), cut them into little sentiment strips and edged them with a dark brown alcohol marker. The images and text sentiments were applied to the canvas using Easy Coat decoupage medium.

I added a little colour over the decoupaged stamp images using Golden Metallic and Aqua Acrylic Inks. These inks have a lovely translucency so do not obliterate the image beneath. You don’t need to be super careful with colouring either.

My characters were stamped onto smooth stamping card using Versafine (Vintage Sepia), cut out and coloured with pencils. I applied Ivory Powertex to the backs to seal them, curving and doming them slightly. I coated the fronts with a layer of Powerwax to protect them. I chose this option as I was concerned that a slow drying wet medium might smudge some of the pencil colouring.

I used one of the MDF Heart Flowers (approx. 12.5cm across) to make an embellishment for the top. The moulded flower was from my stash. It had been made with Stone Art and Ivory Powertex mixed into a clay and used with one of my moulds. When dry it was painted with Easy Varnish tinted with Burgundy Powercolor, then dry brushed with more varnish tinted with Silver, Rich Gold and Copper Colortricx. The MDF flower was coated with Bronze Powertex and the moulded flower glued to the centre with a little Easy Structure paste. Easy Structure paste and Powertex were used to glue the embellishment to the top of the canvas.

Black cotton netting was treated with Bronze Powertex and applied to the canvas base and diagonally across the middle. The characters were then positioned and glued down with Easy Structure Paste (i.e. using it as a 3D glue). Care was taken not to smudge the images with paste or Powertex. Any slight mishaps were wiped away quickly with a damp sponge.

I gathered together lots of Steampunk and nautical embellishments from my stash including die cut ship wheels, anchors, gears, swirls etc. I also had a stash of shells created using paper clay and moulds (already coloured with ink sprays). The embellishments were all coated with Powertex (Transparent or Bronze) and glued in place, using Easy Structure paste where needed. I also dropped some 3D Sand and Balls into wet Powertex for added texture.

In addition I used some recycled gear cogs from the inside my finished double sided tape rollers. These are plastic so I used copper gilding wax (Pebeo) to colour the top surface (Powertex doesn’t stick to plastic) and embedded them well with Easy Structure paste and Powertex coated card pieces etc.

Finally I dry brushed Easy Varnish tinted with Bronze Gold Colortricx lightly over the embellishments to enhance them.

The canvas could be mounted into a 3D box frame to fully protect it from dust etc. It could also be hung directly – perhaps holes cut in the top edge and a string would look quite nautical? If hanging without framing I would advise that everything be fully sealed with Easy Varnish (the characters with more layers of Powerwax); particularly the areas coated with transparent Powertex (coloured Powertex is already weather resistant). It could then be cleaned with a damp cloth (or even rinsed under the tap).

I hope that you like my fantasy creation. I have included a few more pics for more close up views, Anne x.