Floral Trinket Box created with Powertex

I have had a wire box frame in my stash for ages. Originally it had a woven straw covering that fell apart so I removed it with the intention of recovering it. It ended up as another ‘UFO’ (unfinished object) for years. I have finally dug it out and created this Powertex treated fabric box embellished with hand made fabric flowers. Now it’s a fabulous trinket box for storing some of my crafty treasures.

The bare wire frame is a strong construction – similar to the type of wire used to make coat hangers. It measures approx. 8 inches square across the top and 6 inches deep.

I used some recycled cotton bed sheets and treated them with Black Powertex to cover the box and lid. I lined the outer and inner panels to completely cover the wire frame. I gathered some cotton trims for the next stage; some crochet lace and a piece of gathered Broderie Anglaise.

I treated the crochet lace with Powertex and applied around the box base.

The gathered lace was applied around the lid. I also dug out some greyboard lazer cut foliage shapes to embellish the top. These were coated and stuck down with Powertex. When dry I started dry brushing over the surface using Easy Varnish and Silver Colotricx. Extra colour was applied to the foliage to make it stand out from the dry brushed background.

Here you can see the dry brushed lid next to the unpainted base. The dry brushing has emphasised the texture and added metallic highlights.

Next I made some fabric roses from 25mm and 15mm strips cut from recycled bedding. These were created using Ribbon Ruching Flower Combs from Gina B-Silkworks. Basically strips are marked out using the Flower Comb templates, a running stitch is sewn along the marked lines and the stitching is pulled up to gather and shape into a rose. I prepared my strips and treated with Powertex before pulling up the stitching. The Powertex holds and glues the gathering in place. I left the flowers to dry before adding to the box top.

To create the roses I followed instructions detailed in Gina’s new Ribbonwork Flowers Book: Twist Roses from 25mm cotton strips using comb 3a (Rococo Comb Set) and 1930’s Roses from 15mm strips using comb 13a (Venezia Comb Set).

I used one of my dies to cut a frame for the centre (Sizzix), applied to the top and finished in the same way as the greyboard foliage.

The flowers were dry brushed with Easy Varnish and Interference Lilac Pigment. Loving these new Pearl Pigment colours! Powertex was then used to glue down the roses to the centre. I added some ready made flower stamens around the group (purple), and some small ready made satin ribbon roses to the corners (Powertex treated and coloured).

Next I mixed some 3D Sand and Balls into Black Powertex and drizzled the mix around the flowers. A few untreated balls were also dropped into the wet Powertex. The untreated balls kept their original colour on the surface giving contrast with the black base. Once dry I coloured by brushing over the surface using Easy Varnish and Mojito Lime Pigment.

I also dry brushed a little of the Lilac pigment sparingly over the lace trims and used to colour some hand made air dry clay embellishments (created using a silicone mould from my stash) added to the box corners.

I used one of my large rubber stamps (lace design from Heartfelt Creations) to stamp some extra textural interest around the sides using Viola Metallic Acrylic Ink. Note: the fabric surface is already quite textured and not very flat so the stamping does not give a clear impression of the design but just adds a little more depth and interest to the surface.

I hope that you like my new treasure box.

Hugs, Anne xxx.

Medieval Chalice created with Powertex

I had fun creating a medieval chalice from an old glass that I have had for years. If you look closely it is actually made from a recycle wine bottle cut in half. The old bottle base is cut off and stuck to the bottle pouring top. The upturned bottle therefore making a new glass. I didn’t make it myself but it was a present from my ex’s daughter and has sentimental value. Now I have a super chalice to fill with cider and enjoy my drink along with good memories.

I wanted to keep the rim of the glass clean as I intend to use it as a drinking glass. I can clean the inside properly and around the rim etc. after use. The outer decoration will be ok with rinsing but obviously will be washed with more care.

For those that of not heard of Powertex – it is a non-toxic environmentally friendly fabric hardener that can be used to treat natural fibres (cotton, wool, silk, wood, MDF etc.) and create items that are weatherproof.

I first stamped some tissue paper (recycled packaging) with Versamark Ink and heat embossed the script image (Butterfly Poppy Collage set from Chocolate Baroque) with metallic gold embossing powder. I also collected some MDF embellishments ready for decorating. The Ankh is from the Pyramid and Ank Trio set, the hares and small cross from the Mini Hieroglyphs set.

As I wanted to keep the glass for functional use I didn’t want to completely cover it with texture and wanted to keep the stem area comfortable to hold. I first painted a band of black ‘all surfaces’ weatherproof glitter paint (Black Diamonds Crystal Glitter) onto the glass to add some interest and texture which will show through the background areas that I wanted to keep fairly smooth. The gold paint that you can see on the base was done some years ago with glass paints – I covered this up in later steps.

Next I tore areas of the script paper and applied them over the glass stem and bowl using Easycoat Mat Decoupage Medium. Tip: I used a water pen to draw around the pieces that I wanted, making it easy to tear shapes in a more controlled way. I sprayed with a little Green Bister just to blend in a little (dabbing off excess dribbles) where the white tissue paper was a little obvious.

Next was true happiness – a fist full of Powertex Clay – tee hee. I mixed some Stone Art with Bronze Powertex (approx. 50:50) with a small addition of Transparent Powertex, working it well into a non-sticky consistency.

Next I cut of square of T shirt fabric to cover the glass base and treated it with Bronze Powertex. I also treated a strip of T-shirt yarn and used it to secure the fabric over the stem base, then wrapped it up around the glass. Snips of textured lace were treated and added around the base plus a strip of treated lace was added to create a border around the top.

A rough slab of clay was rolled out and impressed using the text stamp. This was glued onto the glass front using Powertex. Stems and leaves were moulded by hand and ‘glued’ in place along with the MDF embellishments. Where needed a little Easy Structure Paste was used as a 3D ‘glue’ (painted over with Bronze Powertex to hide the white colour). A faux gem was stuck into the centre of the ankh.

The chalice was then left to dry for a couple of hours.

Next came the fun of dry brushing. I used Rich Gold Colortricx mixed with Easy Varnish first. It looked a little uninteresting in just the one colour so I also dry brushed with some of the new Aqua Metallic Acrylic Ink. Both of these dry very quickly so I just repeated layers of dry brushing until I was happy with the result.

I will leave the vessel for a couple of weeks to fully dry and cure before giving it a final all over coat of Easy Varnish to fully seal it. Et voila! My lovely new drinking vessel. I cannot wait to use it.